Welcome to YUSH Electronic Technology Co.,Ltd.
YUSH Electronic
  English    Chinese
    Full Automatic solder paste Printer YSL-120
    Detailed Product Description

    Features

    1.Perfect solution for large size product printing

    2.Simple calibration and maintenance

    3.Stable printing quality

    4.Independent developed image processing software

     

    Full Automatic Screen Printer YSL-120 0

     

    Overall diagram

    1.Machine housing module

    2.CCD image capture module

    3.Stencil lifting module of Z-axis

    4.Squeegee printing module

    5.Cleaning module

    6.Platform fine adjustment module

    7.Rail and conveyor module

    8.Three color warning lamp

    9.Display and input device

     

    Full Automatic Screen Printer YSL-120 1

     

    Technical parameters

     

    ParameterYSL-120
    Basic ParametersScreen Frame Size(mm)1000(×)×300(Y)-1500(×)×650(Y)
    Thickness∶ 20-40mm
    Min PCB(mm)80(×)×50(Y)mm
    Max PCB(mm)1200(X)×360(Y)
    Thickness0.2mm~6mm( Use jig when pcb less than 0.4mm)
    Curve<1%(Diagonal measurement)
    PCB backside Part Height15mm
    Conveyor height900±40mm
    SupportMagnetic support,Magnetic piece,Vacuum chamber(Option)
    ClampSide clamp(Standard),please read the option table
    Edge distancePCB process edge ≥2.5mm without PCB edge(Option)
    Conveyor speed0~1500mm/sec,increment 1mm
    Conveyor beltU type belt
    Stopper methodAir cylinder
    Stopper positionSet the PCB stopper position according to the size of board
    Set by softwareSoftware Settings
    Print SystemPrint speed5-200mm/s adjustable
    Print headStep motor drive scraper lifting
    ScraperSteel scraper,rubber scraper(option)
    Scraper angle60°
    Scraper pressure0~20kg
    View SystemSubstrate SeparationThree-section Substrate Separation;Speed∶0.1-20mm/s;Distance∶0-20mm
    Alignment position methodMark Automatic aligning
    CameraGermany BASLER,1/3”CCD,640*480pixel,pixel size 5.6μmx5.6μm
    Acquire image methodUpper/under double photo
    Camera lightCoaxial light,Ring light four kinds light can adjustable
    View range9mm*7mm
    Mark dimensionsDiameter or Side length 1mm~2mm,allowable offset 10%
    Mark shapeCir,Rec,or rhombus etc
    Mark positionPCB dedicated mark or PCB pad
    2D detectionStandard
    AccuracyTable adjusting rangeX=±10mm,Y=±10mm,0=±1.5°
    Positional accuracy±0.01mm
    Printing accuracy±0.025mm
    TimeCycle time<10s(ex print,cleaning time)
    Convert line time<5min
    Programming time<10min
    Control SystemComputer configurationIndustrial PC,Windows official system
    System languageChinese /English
    Pre and next machine connectionSMEMA
    User authorizationUser PW and Senior PW set
    Cleaning SystemCleaning systemDry and Wet,vacuum model
    Liquid level detectionLiquid level auto alarm detection
    Power ParametersMain power supplyAC220V±10%50/60HZ Single phase
    Total powerAbout 3kw
    Main air supply4.5~6kgf/cm2
    Machine weightAbout 1500Kg
    Machine dimensions2350(L)×1350(W)×1590(H)mm
    OptionPneumatic top clampStandard
    Top clamp + side clampFor PCB(thickness≤1mm)
    Vacuum adsorption and cleanFor PCB(thickness≤1mm)and FPC
    Auto tin added/
    Auto loading and unloading/
    Flexible and universal supportFor the Double-sided PCB(PCB backside parts Height ≤9mm)
    Automatic positioning of screen frame/
    PCB board thickness movement adjustment functionStandard
    Squeegee pressure feedback function/
    Air conditionCustomer can buy by themselves
    The rest of solder paste on the stencil monitoring systemT/
    SPI close loopSPI close loop
    UPS power off protectionUPS 15 min power off protection
    Industry 4.0Bar code trace function,Production analysis,etc


    Product Categories
                                            Full Automatic solder paste Printer YSL-120
                                            Full Automatic solder paste Printer YSL-120
                                            Full Automatic solder paste Printer YSL-120
                                             
                                            Detailed Product Description

                                            Features

                                            1.Perfect solution for large size product printing

                                            2.Simple calibration and maintenance

                                            3.Stable printing quality

                                            4.Independent developed image processing software

                                             

                                            Full Automatic Screen Printer YSL-120 0

                                             

                                            Overall diagram

                                            1.Machine housing module

                                            2.CCD image capture module

                                            3.Stencil lifting module of Z-axis

                                            4.Squeegee printing module

                                            5.Cleaning module

                                            6.Platform fine adjustment module

                                            7.Rail and conveyor module

                                            8.Three color warning lamp

                                            9.Display and input device

                                             

                                            Full Automatic Screen Printer YSL-120 1

                                             

                                            Technical parameters

                                             

                                            ParameterYSL-120
                                            Basic ParametersScreen Frame Size(mm)1000(×)×300(Y)-1500(×)×650(Y)
                                            Thickness∶ 20-40mm
                                            Min PCB(mm)80(×)×50(Y)mm
                                            Max PCB(mm)1200(X)×360(Y)
                                            Thickness0.2mm~6mm( Use jig when pcb less than 0.4mm)
                                            Curve<1%(Diagonal measurement)
                                            PCB backside Part Height15mm
                                            Conveyor height900±40mm
                                            SupportMagnetic support,Magnetic piece,Vacuum chamber(Option)
                                            ClampSide clamp(Standard),please read the option table
                                            Edge distancePCB process edge ≥2.5mm without PCB edge(Option)
                                            Conveyor speed0~1500mm/sec,increment 1mm
                                            Conveyor beltU type belt
                                            Stopper methodAir cylinder
                                            Stopper positionSet the PCB stopper position according to the size of board
                                            Set by softwareSoftware Settings
                                            Print SystemPrint speed5-200mm/s adjustable
                                            Print headStep motor drive scraper lifting
                                            ScraperSteel scraper,rubber scraper(option)
                                            Scraper angle60°
                                            Scraper pressure0~20kg
                                            View SystemSubstrate SeparationThree-section Substrate Separation;Speed∶0.1-20mm/s;Distance∶0-20mm
                                            Alignment position methodMark Automatic aligning
                                            CameraGermany BASLER,1/3”CCD,640*480pixel,pixel size 5.6μmx5.6μm
                                            Acquire image methodUpper/under double photo
                                            Camera lightCoaxial light,Ring light four kinds light can adjustable
                                            View range9mm*7mm
                                            Mark dimensionsDiameter or Side length 1mm~2mm,allowable offset 10%
                                            Mark shapeCir,Rec,or rhombus etc
                                            Mark positionPCB dedicated mark or PCB pad
                                            2D detectionStandard
                                            AccuracyTable adjusting rangeX=±10mm,Y=±10mm,0=±1.5°
                                            Positional accuracy±0.01mm
                                            Printing accuracy±0.025mm
                                            TimeCycle time<10s(ex print,cleaning time)
                                            Convert line time<5min
                                            Programming time<10min
                                            Control SystemComputer configurationIndustrial PC,Windows official system
                                            System languageChinese /English
                                            Pre and next machine connectionSMEMA
                                            User authorizationUser PW and Senior PW set
                                            Cleaning SystemCleaning systemDry and Wet,vacuum model
                                            Liquid level detectionLiquid level auto alarm detection
                                            Power ParametersMain power supplyAC220V±10%50/60HZ Single phase
                                            Total powerAbout 3kw
                                            Main air supply4.5~6kgf/cm2
                                            Machine weightAbout 1500Kg
                                            Machine dimensions2350(L)×1350(W)×1590(H)mm
                                            OptionPneumatic top clampStandard
                                            Top clamp + side clampFor PCB(thickness≤1mm)
                                            Vacuum adsorption and cleanFor PCB(thickness≤1mm)and FPC
                                            Auto tin added/
                                            Auto loading and unloading/
                                            Flexible and universal supportFor the Double-sided PCB(PCB backside parts Height ≤9mm)
                                            Automatic positioning of screen frame/
                                            PCB board thickness movement adjustment functionStandard
                                            Squeegee pressure feedback function/
                                            Air conditionCustomer can buy by themselves
                                            The rest of solder paste on the stencil monitoring systemT/
                                            SPI close loopSPI close loop
                                            UPS power off protectionUPS 15 min power off protection
                                            Industry 4.0Bar code trace function,Production analysis,etc


                                            Online Message
                                            Welcome message, we will reply within 24 hours!
                                            *Subject:
                                            *Your E-Mail:
                                            (Please make sure your E-mail address is correct.
                                            Else, the receiver cannot reply you afterwards. )

                                            Content:
                                            *Country/Region:
                                            Your Company:
                                            Your Name:
                                            Tel:
                                            Fax:
                                            YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016
                                            CONTACT US
                                            Contacts:Eva Liu +86 13416743702
                                            Tel:+86-512-62751429
                                            Skype:evaliuhuan
                                            Email:sales@yushunli.com evaliu@hk-yush.com

                                            Address: Building H, GuoRui Pioneering Park,
                                            No. 1068 Jinyang East Road, Lujia Town, Kunshan,
                                            Suzhou.

                                            Postcode:215331
                                            Dongguan Factory Address: 5th Floor, No.10, Shanquan Road,
                                            Yongtou Village, Chang’an Town, Dongguan City, Guangdong
                                            province, China.

                                            Postcode:523843
                                            YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016