Automatic detection of pendulum machine YSL-530
Product features:
1. Automatic feeding: the signal of the front machine will automatically send the products to be placed into the plate.
2. Automatic code scanning: CCD detects product size and has the function of code scanning.
3. Automatic plate setting: CCD guided suction nozzle automatically absorb OK product plate setting.
4. Automatic resolution NG code: NG products automatically into the NG disk, NG code, fork plate into the bad box.
5. Automatic Tray stacking: automatic supply of empty Tray tray and finished tray stacking OK.
6. The AGV automatically feeds into the placed empty Tray Tray and takes away the full tray tray.
7. Adopt multi-axis bus control.
8, gantry structure/manipulator structure (optional)
Automatic swing area
Size detection + automatic swing plate structure
Automatic pendulum structure
CCD camera mechanism description
When the product to be detected reaches the CCD detection position, it is projected through the bottom light source and the front light source, and the top camera starts to detect the product size and bar code according to the set mechanical coordinates, determining OK product and NG product.
Description of gantry handling mechanism
Gantry handling mechanism implements multi-axis control, by X axis, Y axis, Z axis to achieve more walking, plus rotation axis, flexible control of rotation Angle, make the nozzle more flexible use, nozzle can automatically adjust the spacing (10MM-35MM) more than 35MM can be interspaced, camera guide accurate placement.
Automatic detection of pendulum machine YSL-530
Product features:
1. Automatic feeding: the signal of the front machine will automatically send the products to be placed into the plate.
2. Automatic code scanning: CCD detects product size and has the function of code scanning.
3. Automatic plate setting: CCD guided suction nozzle automatically absorb OK product plate setting.
4. Automatic resolution NG code: NG products automatically into the NG disk, NG code, fork plate into the bad box.
5. Automatic Tray stacking: automatic supply of empty Tray tray and finished tray stacking OK.
6. The AGV automatically feeds into the placed empty Tray Tray and takes away the full tray tray.
7. Adopt multi-axis bus control.
8, gantry structure/manipulator structure (optional)
Automatic swing area
Size detection + automatic swing plate structure
Automatic pendulum structure
CCD camera mechanism description
When the product to be detected reaches the CCD detection position, it is projected through the bottom light source and the front light source, and the top camera starts to detect the product size and bar code according to the set mechanical coordinates, determining OK product and NG product.
Description of gantry handling mechanism
Gantry handling mechanism implements multi-axis control, by X axis, Y axis, Z axis to achieve more walking, plus rotation axis, flexible control of rotation Angle, make the nozzle more flexible use, nozzle can automatically adjust the spacing (10MM-35MM) more than 35MM can be interspaced, camera guide accurate placement.
SMT placement machine placement machine parts placement machine
Dual arm magnetic linear LED highspeed pick and place machine
SMT Machine/ High Professional Customization/ Multi Function SMT Line Automatic Factory in China
Best Selling Heller Reflow Soldering Oven Machine For SMT Machine Line
High Speed 6 Heads Multi-functional SMT Pick and Place Machine LED Automatic
Manual v groove Cutter,metal Strip Pcb Cutter ,guillotine for Pcb Cutter
930*880*1750mm High Speed PCB Separator|PCB Punching Machine for LED/ PCB/FPC Board
Contacts:Eva Liu +8613450659407 +86 13416743702
Tel:+86-512-62751429
Skype:evaliuhuan
Email: caojun@hk-yush.com sales@yushunli.com evaliu@hk-yush.com
Address: Building H, GuoRui Pioneering Park,
No. 1068 Jinyang East Road, Lujia Town, Kunshan,
Suzhou.
Postcode:215331
Dongguan Factory Address: 5th Floor, No.10, Shanquan Road,
Yongtou Village, Chang’an Town, Dongguan City, Guangdong
province,
China.
Postcode:523843